Hire a trusted appliance repair service in Hampshire

the trainer is displaying "level error" and "motor error"

Our Siemens extractor fan was not working. We found the model part number, got a replacement motor and installed this. The unit turned on but then, when we went to the max/boost setting, it cut out again and will now not turn on. We've reached the extent of our DIY abilities and are looking for professional help to get this working again.

My running machine now makes 3 beeps when the power is turned on, and inserting the key doesn't make any difference. The console doesn't come on and the unit is unresponsive. I need to get this working again. I also have a spare motor ready to go into the unit, as the last inspection in 2022 showed the motor needed replacing (as the belt was slowing down when pressed). I could do with someone to fix this new problem and install the new motor.

Bubbles came out of machine now it’s showing error messages. I’ve drained the machine and switched off the power. It has not fixed the problem.

I have a Dream Fitness D1000 home treadmill. The belt has become very sticky when run on. I’ve tried a lubricant but it’s no better and probably needs a service. http://www.dreamtreadmill.co.uk/D1000%20Treadmill.html Southampton area. Thanks, Dave

I bought this Reebok Ice treadmill from FB marketplace. After lubing the belt it runs fine however after 1 minute there is a smell coming from the motor, very specific burning smell and I am scared to run on the treadmill so that it doesn’t catch on fire

My ironing machine is not starting but has a bit of light at the beginning when plugged in.

Hello there. I have a delonghi eletta cappuccino, white coffee machine. The machine can never complete a descale process as it will continuously ask to fill up the tank with water and solution, it will run the process and then ask again and again. Perhaps there's a sensor that's not so hot. Can you help with this, if so what are your charges? Thanks

Champion 2000 watt inverter Generator starts but doesn't pick up engine speed and cuts out. - Due date: Before Tuesday, 5 December 2023

Hello, I need a new lock on my washing machine. - Due date: Flexible

Long case clock has stopped the hourly chime - Due date: Flexible

Our 2 year old Hoover washing machine needs repairing. We believe the bearings have gone as the drum moves around a lot and it is very loud during the cycle. There is also a rip in the seal. - Due date: Flexible

Sherborne recliner chair- Model: Ashford small electric lift recliner- Dual motor Leg rest and tilt function no longer responding, small click heard when handheld unit pressed Power still working as back rest moves up and down- have tried all recommended troubleshooting in manual and chair now 6 years old out of warranty Need immediate fix as chair in constant use - Due date: Needs to be done on Wednesday, 30 August 2023

All electronic systems appear to be working but belt does not move when treadmill started. ? Motor burn out. - Due date: Flexible

Repair or replacement of ceiling extract fan and control panel. The fan unit was connected to AC ducting in the roof void that was decommissioned many years ago. - Due date: Flexible

clock has stopped needs repair - Due date: Flexible

Coffee machine making coffee intermittently. Sometimes the water goes straight to the tray without making coffee. We fix it by turning machine off. - Due date: Flexible

Treadmill starts, touchscreen tooks long to load, but the main problem is that treadmill turns off after a little while. I'm not sure why, just suddenly stops - Due date: Flexible

stopped working abruptly after smelling burning smell - Due date: Flexible

I have a treadmill that has stopped working - the machine stopped when we turned it on and it tripped the electrics - Due date: Before Sunday, 7 May 2023