Find a professional local carpenter in South Bucks District

We have two Pax designs - one for a sloped loft bedroom, one for a normal bedroom. We require these to be built, but adapted to 'fit' in the space. The designs we have will require modifying - the PAX in the loft will require cutting to fit the angled roof, and the one in the bedroom will require additional coving to fit exactly to the side of the room (small height adjustment, putting a panel above the wardrobe so it goes to ceiling height), and small additional side panels to fit to the width. We require a 'bulilt in' look. We will supply the wardrobes, we would be paying for fitting and adapting the units. I have added photos to the tasks for more details regarding measurements. We are happy to supply any additional materials required. Would pay 800-1000 to complete this work

Create a door under the stairs . Please see attached picture. 1st picture current state. 2nd picture how it should look and operate. The door to the right is a fake. Will provide materials.

Build a Leviathan SideShed Gazebo W5m X D3m From Dunster House or consult on best options for gazebo with side shed - Due date: Flexible

We are looking for someone to build shelving and cabinets below into an alcove - Due date: Flexible

Install a cat flap on this door to my garden - Due date: Flexible

Product code: MM31577 Colour: White, gold Material(s): Wood, glass, metal 50cm x 60cm x 20cm (width x height x depth) 19.7inch x 23.6inch x 7.9inch (width x height x depth) Weight: 9.00KG - Due date: Before Friday, 7 July 2023

We are putting in some ikea kallax cubes into a kids playroom. I need some help in either removing part of the skirting board and making the kallax fit flush against the wall or making a frame so the kallax can sit on top without removing the skirting board - whatever is the cheaper option. I will assemble the kallax cubes. There were will be 2 x 4x2 and 1 4x1. - Due date: Flexible

To build a frame and a double door in the porch to separate the area behind the door for storage and leave the entrance tidy. the porch is 135cm wide and 210 cm high.

To build a frame and a double door in the porch to separate the area behind the door for storage and leave the entrance tidy. the porch is 135cm wide and 210 cm high.

large shed needs lighting, insolation and plastering, flooring and shelves, exterior needs to be repainted. Revamp into workspace/storage. Due date: Before Friday, 8 July 2022

I have an apex 7x5 wooden garden shed, I need help assembling/putting up. I have all the tools but just need a ladder. - Due date: Needs to be done on Tuesday, 3 May 2022

Install rails and shelves in 5 build in wardrobes. The wardrobes will be painted and ready just for installation. Images will be provided when the wardrobes are ready. - Due date: Needs to be done on Saturday, 7 May 2022

I need a bunk bed made to fit a space unfortunately it's too big to fit along the wall I want it to sit

Just need my steel shed to be pushed by about 2 meters so I can get access to repair and level off its concrete base. Then, after I have repaired the shed's base, I will need you to come back to help me move the shed back on to the repaired concrete base. - This task is a 2 man job as this shed weighs over 300kg but I will be on site to direct & coordinate the move and to physically help also. However, You must supply: Four exterior grade hardwood plywood sheets measuring 2440mm x 1220mm ( i.e. 8ft x 4ft) at about 5-6mm thick. This sheet material is absolutely essential in order to perform this task quickly and safely. The Ply needs to be exterior grade / weather proof ply. The cost of this exterior grade hardwood ply sheet material varies but can be found for as little as £40 (inc VAT) trade, up to about £58 (inc VAT). Please Note: This exterior grade hardwood plywood sheet material is needed in order to: 1, Facilitate the movement of the 300kg shed. 2, To protect the attached steel floor of the shed. 3, To prevent any possible slight buckling of the wall panels. ( - I have also packed out and taped up the two front doors to make the whole front side of the shed as rigid as possible. This will prevent any movement of the doors during the move and also aid us moving the shed ). Regarding tools, only two or three decent crowbars will be needed, which I can provide. These will be used at times in order to gently lift the shed slightly when necessary in order to slide the plywood underneath. I can also provide various suitable wedges to place underneath the shed to aid the placing of the plywood sheets underneath the shed.. This job will only take about 10 - 20 minutes each way to complete.. I have attached three pictures of this shed to this task.