Find a professional kitchen sink installation service near you

Kitchen sink is blocked . Used many solution but it’s blocked

Kitchen sink trap is leaking. Needs repairing. The dishwasher is also connected to this.

We would like our existing kitchen sink replaced with a bigger one that we have already purchased. The worktop will need cutting out bigger for it to fit. Waste pipes underneath will most likely need adjusting too.

My kitchen sink (brand Franke) dropped off the frame after 10 years of usage. Its a single bowl type, under mounted. Turns out the hinges were never fitted and it had only been glued on. Franke admitted thats not how it should have been done and sent parts but Im finding it impossible to fit them.

I have a new kitchen tap that I’ll like to replace. It’s a different model from what I currently have and may need some alteration to the current setup

I would like someone to fix my leaking kitchen sink - replace the tap and fix a toilet cistern as it won’t flush

The waste pipework from the kitchen sink is old and a mixture of Ikea and 40mm pipe and joints. The 40mm has come away from the Ikea waste and i cant tighten it up. The section from the Ikea waste to the external drain just needs replacing. I have circled where the joint has come undone in the photo attached.

The kitchen sink I currently have I do not like I have bought a new kitchen sink and I would like it to be changed

Hi, current kitchen sink is leaking so I want to replace it. Thanks

Would you be interested in plumbing our new kitchen sink? Pictures in link below https://photos.app.goo.gl/rqVe5gKXhNhhzEBz7 I'll cut out the worktop myself to fit the sink. Waste water goes out into the gulley straight through the wall. Let me know how much and when you can do it, I hope to get it done in the next 2 weeks.

Essentially the base of the current sink is leaking and we need to replace the sink with a new one. I'm gonna get the sink I just need someone to put it on with a reasonable price It may need the worktop to be cut out and adjusted to fit new sink Measurements of current sink round: 900mm About 50mm width New sink: 900mm length 470mm width

My kitchen sink and washing machine lanes have been blocked, yet they are both connected to the same channel. I've already tried most of the unclogged techniques several times, but I can't figure out the blocks. I also don't know where the Manu hole is in my house, and neither does my landlord. As a result, like someone who can figure things out without much help.

Studio flat kitchen sink is blocked. Drain coil (plumber snake) and drain blocker and Cillit Bang Drain Unblocker were used. The sink is filling up quickly when the tap is on.

The pipe under the sink in the kitchen is leaking but not sure where. Need someone to help find the leak and fix it.

To install 1 x kitchen sink, 15 litre hot water heater, saniflo macerator pump. Run waste pipe from unit to back of building. Run cold feed from back of building to unit.

The water pressure is very low and I can’t remove the filter.

Under the weight of a full sink, the kitchen sink pulled away from the kitchen bench above. It needs to be re-attached to the bench.

I have a leak under kitchen sink that needs fixing

Kitchen Sink Problems to be resolved , anytime we are washing clothes, the water doesn’t go down the sink but comes up through both holes ; it looks the sink is blocked and cold water stops flowing freely - Due date: Flexible

Blockage causing water to rise in sink when washing machines or dishwasher is on - Due date: Flexible