Find a professional local handyman in Elmbridge Borough

Cutting existing fitted coving to fit the wardrobe ( to re use the piece when we are moving out)

Hillary Blind venetian draw cord has frayed and needs replacing both sets. Kitchen window.

I want to fi a ring door ball

Change handle on toilet - I have new handle

Repair oak bookshelf oil damage. Diffuser leaked onto shelf causing discoloration to oak bookcase. May need waxing but not sure.

Bathroom window needs repair

We have had a Sharps fitted wardrobe in the bedroom for a long time. One door was bumped and the two upper hinges were disconnected leaving two of the four intact. Not aware of any damage to the two loose hinges but unable to reinstate them.

Wobby legs, need correcting

Fix leaky shed roof Fix leaky loft roof Insulate loft Build back gate Flush radiators And so much more

As seen in the photo, to replace the current floating drawer and floating desk with new units. New heavy duty L shape brackets provided. New round mirror also fitted on the wall. New TV bracket to also to be fitted.

Pictures have got damaged in transit

The wall os old and crumbling, we need it rebuilt, possibly higher than it is now.

Renter moving out Remove 3 lights and replace with a cord and small plastic ceiling rose Remove a sky dish Fill in holes and make good where pictures have been hung

Curtain pole to be put up Hinges to be changed on cupboard door so it’ll close properly Kitchen drawer to be sanded down so we can open it properly

Remove wall paper 12 m sgq

One planter metal farm trough needs holes drilled in bottom Just four or five holes but it's thick. metal so will need correct drill. Did other one but this one thicker metal. It's a really quick and easy job should only take ten minutes with correct drill. These quotes are way too much that I'm receiving.

Looking for someone to help repair our outdoor table. It’s got a concrete resin top and it has blistered in the sun/rain/cold. I contacted the company and it’s out of warranty but they recommended that it needs sanding the top of the table down and re setting with resin suitable to be used on cement fibres. Can anyone help?!

Cut and fit three roller blinds for us please.

2year old radiator and thermostat seems to have failed. Too expensive to just throw away

I need an expert to help mount my Sky Glass TV. I’ll be home to help, since 2 people are required. I have a drill, hammer, screwdriver and level. It’s a heavy TV, so care needs to b taken! If you have materials for the screws and wall hooks, please bring a se of 4.